This type of rolling process can inhibit the soft graphite into a plate without any adhesive. The whole process is carried out on professional equipment equipped with roller rollers.
The rolling mechanism is made up of: (1) a silo for spider graphite (2) a vibration feeding device (3) a conveyor belt (4) four working pressure rollers (5) A pair of electric heaters (6) a thin and thick roller for the control plate (7) a grain or pattern design roller (8) and a roll (9) cutter (10) for the finished roll
The whole process of the work: high purity graphite from the bin into the feeding equipment, falling on the conveyor belt. After the rolling of the working pressure roller, a certain thin and thick material layer is produced. The heating device causes high temperature heating to remove the residual vapor in the incoming material layer and make the uninflated graphite rise one last time. Then the basically formed inverse material is sent to the roller with the thin and thick specifications and pressed again according to the specified specifications, which is convenient to obtain the whole plate with the thin and thick symmetry and a certain relative density.
